Portable Frac Separators

Specs: (1000 psi x 12.2m³)
  • 6,894kPa x 12.2m³ (1000psi x 76.7 bbl) Portable Frac Separator
  • 2” & 4” Wafer style V-Cone gas meters w/ digital displays and Barton chart recorder. Capable of live-data feeds and fully downloadable. Flow rate – 1700 10³m³/day (60 mmcf/day).
  • Live well data feed capable (SCADA)
  • 2” Fig. 1502 RDI 10,000 psi integral flow-line
  • Single Stage 2” Fig 1502 10,000 psi RDI manifold mounted on test unit. With tungsten lined positive choke beans for better corrosion resistance.
  • 3” Fig. 206 2000 psi flare, pressure relief, and production lines.
  • 1” Sparge Ring (dirty side of weir) & 1.5” Gama Jet™ Line to supply sparging heads for quick and easy cleanouts.
  • Sparging system allows no-entry cleanouts without opening manways.
  • Registered in Alberta & B.C, supplied with an “U” stamp & NB#
  • All flow-line is constructed to ASME B31.3 (sc)
  • 10,000 psi and 5,000 psi chemical pumps with 10 000 psi 1/4” hose reels.
  • 2” pneumatic fluid dumps and controllers w/ digital fluid meters.
  • 120v Cata-dyne™ heaters with enclosed belly.
  • Two 400 lbs propane tanks and one 429L methanol tank mounted on goose-neck of trailer.
  • 220/110v electrical connections.
  • 2.5” Welded removable in-line heat/steam coil
  • Temperature rating: -45/121°C (-50/250°F)
  • Vessel Designed & Constructed to ASME Sec.VIII, Div 1, current edition
  • Heavy-Duty Tri-Axle Trailer
Specs: (1440 psi x 9.86m³)
  • 9,928kPa x 9.86m³ (1440 psi x 62.0 bbl) Portable Frac Separator
  • 2” & 6” Wafer style V-Cone gas meters w/ digital displays and Barton chart recorder. Capable of live-data feeds and fully downloadable. Flow rate – 2400 10³m³/day (80 mmcf/day).
  • Live well data feed capable (SCADA)
  • 2” Fig. 1502 RDI 10,000 psi integral flow-line
  • Dual Stage 2” Fig 1502 10,000 psi RDI manifold mounted on test unit. With tungsten lined positive choke beans for better corrosion resistance.
  • 3” Fig. 206 flare, pressure relief, and production lines.
  • 1” Sparge Ring (dirty side of weir) & 1.5” Gama Jet™ Line to supply sparging heads for quick and easy cleanouts.
  • Sparging system allows no-entry cleanouts without opening manways.
  • 10,000 psi and 5,000 psi chemical pumps with 10 000 psi 1/4” hose reels.
  • 2” pneumatic fluid dumps and controllers w/ digital fluid meters.
  • 120v Cata-dyne™ heaters with enclosed belly.
  • Two 400 lbs propane tanks and one 429L methanol tank mounted on goose-neck of trailer.
  • 220/110v electrical connections.
  • 2.5” Welded removable in-line heat/steam coil
  • Heavy-Duty Tri-Axle Trailer
  • 6” Flare Line Compatible (optional)

Popular Equipment

Skid Mounted Pressure Tanks

While easily delivered to different locations, our tanks can store volatile liquids under extreme pressure.

Junk Catchers

Don’t allow unwanted debris to cause damage to your measuring equipment and pressure control

Flare Stacks

Unplanned over-pressuring of plant equipment is a regular occurance; our selection of Flare Stacks safely relieves pressure to reduce risk to equipment and personnel

Contact Us

11234 91 Ave, Grande Prairie, AB, Canada T8V 6K6

Suite 700 – 736 6th Ave. SW Calgary, AB, Canada T2P 3T7

500 5 Avenue SW, Suite 600 Calgary, AB T2P 0L7

+1-833-SKY-WELL

780-402-3955

admin@skylinetesting.com